Back to blog

Cracked Heat Exchanger: Signs, Dangers and What to Do

Cracked Heat Exchanger: Signs, Dangers and What to Do

A cracked heat exchanger is a serious furnace fault because the crack can let combustion gases, including carbon monoxide (CO), mix with the air you breathe. If you suspect one, turn the furnace off, make sure your CO alarms are working, and have a licensed heating technician inspect it before the furnace runs again. If an alarm sounds or anyone feels ill, get everyone outside first. At Mystic Valley Home Services, our licensed and insured Massachusetts technicians handle boiler and furnace repair and no-heat emergency diagnostics, with same-day or next-day service.

TL;DR

  • The heat exchanger keeps burning gases separate from the air that heats your rooms. A crack can break that separation and let carbon monoxide into your living space.
  • Warning signs include a yellow or flickering flame, soot, a strange odor, banging at startup, short cycling and repeated CO alarms. Many of these also have other causes, so they call for a technician, not a guess.
  • If a CO alarm sounds or anyone feels dizzy, nauseated or has a headache, leave the building and call 911 from outside.
  • Only a hands-on inspection and combustion testing can confirm a crack. Do not run a furnace you suspect is cracked while you wait.
  • Get the findings in writing before approving a repair or replacement, because the right choice depends on the furnace's age and condition.

Overview

This guide is for homeowners and business owners. It explains what the part does, which signs you can actually notice, what to do in the first hour, and how a technician confirms the problem.

What a heat exchanger does and why a crack matters

In a gas furnace, fuel burns inside a sealed metal chamber. That chamber is the heat exchanger. Its metal walls absorb the heat, and the blower pushes cool air from your home across the outside of those walls. The air warms up and travels through your ducts to the rooms. The exhaust from the flame, which contains carbon monoxide, is supposed to stay inside the chamber and leave through the vent pipe.

So the part does two jobs: it moves heat and it keeps two airstreams apart. Your family breathes one of them. The other should never reach you.

A crack or hole in the metal means the barrier has failed. Depending on how the furnace's pressures behave, combustion products can reach the air your blower circulates, or the flame can be disturbed so it burns badly and produces more CO. A 2026 academic review of carbon monoxide in US homes describes cracked or corroded heat exchangers as a signature failure mode. It explains that repeated heating and cooling can make the metal brittle until fissures form, and that this is one of the most common routes for CO into homes heated by forced-air gas furnaces.

The same review notes that no federal rule, and in most states no state rule, requires periodic inspection of fuel-burning appliances in owner-occupied homes. In plain terms: nobody is going to check this part unless you arrange it.

Why heat exchangers crack

The metal expands every time the furnace fires and contracts every time it stops. Over years that cycle causes fatigue. Several things speed it up:

  • Age. The longer a furnace has run, the more heating cycles the metal has been through.
  • Restricted airflow. A clogged filter, blocked return or failing blower makes the exchanger run hotter than designed, which stresses the metal.
  • Oversizing and short cycling. A furnace that fires and shuts down constantly flexes the metal more often.
  • Corrosion. Moisture and combustion byproducts can rust the metal from the inside or outside.

New England winters put a lot of run time on heating equipment, and many older Massachusetts homes have furnaces that have been through decades of those seasons.

Signs of a cracked heat exchanger you can actually notice

You cannot see inside the heat exchanger without taking the furnace apart, but the furnace often shows symptoms. Manufacturer guidance, including American Standard's heat exchanger glossary, lists these:

  1. A flame that looks wrong. A healthy gas flame is steady and blue. A yellow, orange or flickering flame suggests poor combustion.
  2. Soot. Black deposits around the burner area or heat exchanger chamber mean fuel is not burning cleanly.
  3. An unusual smell. Some people describe a formaldehyde-like or pickle-like odor, or a metallic smell, when the furnace runs.
  4. Banging or rattling at startup. A crack can change how the metal expands and how air moves.
  5. Short cycling. The furnace turns on and off in quick succession.
  6. Visible cracks, rust or corrosion. If you can see damage by looking through an access panel, do not touch anything and leave the furnace off.
  7. A CO alarm that goes off or keeps going off. This is the most important sign of all.

CO itself has no smell, color or taste. That is why the smell and flame clues matter less than a working alarm.

Symptoms in people

CO poisoning in people often feels like the flu without the fever. Headache, dizziness, weakness, nausea, vomiting, sleepiness and confusion are the commonly listed signs. A pattern is the clue: if household members feel worse at home, feel better when they leave, and the heat has been on, treat it as a possible CO problem. Pets and house plants reacting badly at the same time can be another hint.

Signs are not a diagnosis

Every item above can also come from something less serious. A dirty burner, a failing igniter, a clogged filter or a blocked vent can produce a yellow flame, odd noises or short cycling. Manufacturer troubleshooting guidance such as Trane's page on cracked heat exchangers makes the same point: these symptoms overlap with other furnace faults.

So the right reaction to a symptom is not panic and not a verdict. It is to shut the furnace down and have someone qualified look at it. If your problem is simply that the furnace will not start, our guide on reading the furnace LED and running five-minute checks covers the safe things to look at first.

Is a cracked heat exchanger dangerous?

Yes, it can be. The danger is carbon monoxide, which displaces oxygen in your blood and can make people sick before they realize why. The Minnesota Department of Commerce furnace guide names a cracked heat exchanger among the possible causes of CO in a home, alongside venting problems and combustion-air problems.

Two details from that same guidance matter in practice:

  • A crack is one of several CO sources. A CO reading does not tell you where the gas is coming from. It could be the heat exchanger, a blocked flue, a water heater or another fuel-burning appliance. Finding the source takes testing.
  • The risk is highest when you are asleep or away from the furnace. The furnace may run overnight in a closed house, and the people most affected can be young children, older adults and anyone with heart or breathing problems.

Not every crack leaks all the time. Some leak only when the blower is running, because of how pressure moves through the unit. That is one reason a furnace can seem fine on one visit and unsafe on another, and why professionals use instruments rather than eyesight alone.

What to do right now if you suspect a cracked heat exchanger

Take these steps in order.

If a CO alarm is sounding or anyone feels ill:

  1. Get everyone, pets included, out of the building into fresh air immediately.
  2. Call 911 from outside. Do not go back in to look for the cause.
  3. Do not re-enter until emergency responders say it is safe.
  4. Once the building is cleared, call a heating technician to find and fix the source before the system is used again.

Our article on boiler carbon monoxide and why to call 911 before a technician explains the same order of operations, and it applies to furnaces too: safety first, repair second.

If there is no alarm and nobody feels ill, but you see signs:

  1. Turn the furnace off at the thermostat and at the switch near the unit.
  2. Open a few windows briefly to ventilate if the weather allows, and keep the furnace off.
  3. Check that your CO alarms are plugged in or have fresh batteries, and that there is one on each level and near sleeping areas.
  4. Call for a heating inspection and CO test. Tell the dispatcher what you noticed, including any flame color, soot, smell or noise.
  5. Use safe temporary warmth while you wait, such as extra layers and blankets. Never use an oven, a grill or a portable fuel-burning heater indoors to make up for a dead furnace, because those create their own CO risk.

In a Massachusetts winter, going without heat is also a real problem, especially with older family members or small children at home. That is why we treat no-heat situations as urgent and offer same-day or next-day service.

How a technician confirms a cracked heat exchanger

There is no single trick. A qualified technician combines a visual check with instrument testing, and good ones show you what they found.

Visual inspection

The technician removes panels and looks at the exchanger's accessible surfaces for cracks, holes, rust-through, warping and soot patterns. Sometimes a camera is needed for areas that cannot be seen directly. A hairline crack can hide in a spot no one can see, so a clean look does not always end the question.

Combustion and CO testing

Instruments measure CO in the flue gas and in the supply air coming out of the registers, and compare readings when the blower comes on. A published example from the American Society of Home Inspectors describes an inspector who saw CO rise past 600 parts per million at the vent when the circulation blower started, with airflow reversing at the intake. That pattern fits heat exchanger damage, because a damaged exchanger tends to leak from the higher-pressure air side into the combustion side. It shows why a test during blower operation, not just a look, is the thing that settles the question.

Technician tests furnace supply air for carbon monoxide

What you should get

Before you approve a repair or replacement, ask for the findings in plain terms: where the crack is, how it was found, what the CO readings were, and photos where possible. A cracked exchanger is an expensive decision, and you are entitled to know exactly what the technician saw. Our approach is transparent upfront pricing, so you know what you are agreeing to before work starts.

Repair or replace: how to think about it

Cracked exchangers are rarely repaired the way a leaking pipe is patched. A crack is not something to seal with a sealant or a weld and hope. The practical options are replacing the exchanger itself or replacing the furnace. Trane's explanation of the heat exchanger says repair can involve removing and replacing the damaged exchanger cell, that other parts may need replacement too, and that this ranks among the more expensive furnace repairs.

Three questions usually decide it:

  • How old is the furnace? If it is well into its second decade, a new exchanger in an aging unit means you may soon face other failures: the blower, the control board, the igniter. Spending a large amount on a unit near the end of its life is hard to justify.
  • Is it under warranty? Some manufacturers cover the heat exchanger for a long period. Find the model and serial number on the furnace's data plate and check your paperwork before you decide.
  • What does the rest of the system look like? If the furnace has other worn components, a clean replacement is often the more sensible path.

For homes that heat with a boiler instead of a forced-air furnace, the same logic of safety, age and condition applies, and our high-efficiency boiler installation is the upgrade path when an old boiler is past repairing.

Cost varies widely with the furnace brand, the part, the labor involved and the home. We do not estimate a figure without seeing the unit. What we can do is inspect it, tell you what is wrong, and give you the price before the work begins.

If you manage a commercial building

Business owners face the same hazard with a bigger consequence: more people breathing the air, and more responsibility. Rooftop units and gas-fired heaters have heat exchangers too. Building staff who report headaches, a worker complaint about fumes or a CO alarm going off should be treated as a safety event, the same as at home: evacuate, call 911, and have the equipment checked before it runs again.

Prevention is cheaper than an emergency. Our guide to common commercial HVAC system failures and how to catch them early covers what to watch for, and a scheduled maintenance contract puts a technician in front of your equipment before the cold season, not after the first complaint.

How to lower the odds of a cracked heat exchanger

You cannot make metal last forever, but you can avoid the conditions that shorten its life.

  • Schedule an annual tune-up before heating season. A technician cleans the burners, checks combustion, inspects the exchanger and tests for CO. Our annual heating tune-ups are built for exactly this.
  • Change the filter on schedule. Restricted airflow overheats the exchanger.
  • Keep returns and registers clear. Furniture and rugs over vents add the same strain.
  • Keep CO alarms current. Test them monthly and replace them according to the manufacturer's date on the back.
  • Do not ignore short cycling. It can point to airflow or sizing problems. Our article on boiler short cycling shows which checks are safe for a homeowner.

Because no rule forces owner-occupied homes to have appliance inspections, the annual visit is a habit you set yourself, and it is the single most useful thing on this list.

Get a safe answer from a local team

If your furnace is showing any of the signs above, you want a clear answer quickly, and you want it from someone who will explain what they find. Mystic Valley Home Services is a family-owned and operated team of licensed and insured Massachusetts technicians, with direct owner oversight and deep experience in Arlington's older homes. Our boiler and furnace repair and no-heat emergency diagnostics come with same-day or next-day service and transparent upfront pricing.

Mystic Valley Home Services

If you would like a safety check before the cold sets in, our boiler and water heater safety checks look at the equipment that can put CO into your home. Book through our site and tell us what you have noticed.

Our view on cracked heat exchangers

Most of the heating calls that worry us are not dramatic. A homeowner mentions that the flame looks a little yellow, or that the furnace has started banging, and has put it off for a few weeks because the house is still warm. We would rather you call early. Our view is simple. A furnace is a combustion appliance in the middle of your home, and it deserves the same attention as the brakes on your car. Do not wait for a failure to learn what condition it is in. A yearly tune-up, working CO alarms and a quick call when something looks or sounds different will prevent most of the bad situations. When we inspect a furnace, we explain what we find, and we quote the price before any work begins. If a furnace is too far gone, we say so and talk through the options. If the unit is sound, you leave with peace of mind and a furnace that is ready for the season. Older New England homes often have older equipment, and we know how to work in them. Matt

FAQ

How long can a furnace run with a cracked heat exchanger?

It should not run at all once you suspect a crack. The furnace may keep producing heat, which makes it look fine, but the safety barrier is compromised. Turn it off and have a technician test it before you use it again.

What are the first symptoms of a cracked heat exchanger?

Common early signs are a yellow or flickering flame, soot, a strange odor, new banging noises at startup and a CO alarm that goes off. People in the home may also get headaches or dizziness. Because other furnace faults cause similar symptoms, an inspection is the way to know for sure.

Can I see a cracked heat exchanger myself?

Sometimes a large crack or rust-through is visible through an access panel, but many cracks are hidden or only open when the metal heats up. Do not open the furnace and run it to check. A technician uses a camera and CO instruments to test it safely.

Is a cracked heat exchanger always an emergency?

Treat it as urgent every time. If a CO alarm sounds or anyone feels ill, leave and call 911. If there is no alarm, shut the furnace off and arrange an inspection as soon as possible rather than waiting for the next service visit.

Does a carbon monoxide alarm replace a furnace inspection?

No. An alarm tells you that CO is already in the air. An inspection looks for the problem before the gas builds up, and it identifies where the CO is coming from. You want both.

Sources

More from the blog